A Highly Sophisticated Production Table - What does this mean?

KONGSBERG iXL44 3000x2000mm  "WHAT WILL IT DO?"

It will cut out paper, card, display board, plastics, polyprop, foamex all with a knife.

It will Kiss Cut Self Adhesive PVC with extreme accuracy

It will cut Kappa, Thick Corrugated
& Foam Boards up to 20mm thick
with a Hi-Frequency reciprocating Knife Tool.

It will Crease using a range of crease wheels

It will score

It will V notch Dibond

It will drill

It will plot with a pen very accurate traces.

This is 5mm Foamex.  It will Router Foamex - Perspex - ACM (Dibond)  up to  20 mm thick using a 1kw milling tool.

Routing of ACM
(Aluminium faced Composite)
Dibond

i -cut technology - Means it has a very accurate registration system to within 0.118". A camera optically locates registration marks pre printed on the sheet, this will compensate for any distortion in material such as shrinkage or stretching, then contour cut perfectly.

Close up of the above job showing
a very fine black key line that
the i-cut system was able to keep register to.